
예 % 7b % 7b0 % 7d % 7dM % 7b % 7b1 % 7d % 7dKW % 7b % 7b2 % 7d % 7dV-IP55
설명
기술적인 매개 변수
외곽선 치수

메인 테크니컬 파라미터
|
프레임: |
H280 |
|
전력 범위: |
90KW |
|
전압: |
380V, 400V, 415V, 460V, 490V, 660V, 690V |
|
빈도: |
50Hz, 60Hz |
|
숫자 개수 극: |
2P, 4P, 6P, 8P, 10P, 12P |
|
3000분당 회전수 |
|
|
냉각 메코드 |
IC411 시리즈 |
|
보호 등급 |
IP55 |
|
F (155 학위 ) % 2c H (180 학위 ) |
|
|
의무: |
S1, S4, S5, S6, S9 |
|
장착 유형 |
B3/ B5/ B35/ V1 |
|
표준: |
국제전기기술위원회 |
|
효율성 등급 % 3a |
IE3 (국제에너지) |
제품소개(Product Introction)
If a 저항 판독 할 수 없음 be made in the 시간 간격 지정 in 테이블 6, it shall be made as 곧 as 가능 but not aftermore than twice the 간격 지정 in 테이블 6, 및 추가 판독값 shall be 촬영 at 간격 of 대략 1 최소 까지 이것들 판독값 가지고 시작된 a 뚜렷한 쇠퇴 에서 그들의 최대값 값 . A 곡선 의 이것들 판독값 shall be 플롯된 as a 함수 의 시간 및 외삽 에 the 적절한 시간 간격 of 테이블 6 for the 정격 출력 of the machine . A 세미 - 로그 플롯 is 권장 where 온도 또는 저항 is 플롯 에 the 로그 스케일 . 더 값 의 온도 따라서 획득 shall be 고려된 as the 온도 at 셧다운 . 만약 연속 측정 쇼 증가 온도 후 종료 최고 value shall be taken 입니다.
If a 저항 판독 할 수 없음 be made 까지 이후 twice the 시간 간격 지정 in 테이블 6, this 방법 of 수정 shall only be used by agreement .
기계 포함 하나 코일 - 측면 당 슬롯 , 더 저항 방법 바이 직접 측정 할 수 있음 있다 사용 if the 기계 comes to rest within the 시간 간격 지정 in 테이블 6. 만약 the 기계 takes 더 than 90 s to come to rest after switching off the power , the superposition method ( see 8.6.2.1) may be used il before agreed .
감지기 shall be 적당히 분산 throughout the 권선 및 number of detectors 설치 shall be not less than six .
모든 합리적인 노력 , 일관성 안전 , 할 것 있다 만들어진 to 장소 the 검출기 at the points where the 최고 온도 are 가능성 to 발생 , in such a manner that they are effective protected against contact with the 1차 냉각수 .
그만큼 최고 판독값 에서 ETD 요소 shall be 사용 to 결정 온도 의 와인딩 .
ETD 요소 또는 그들의 연결 may fail and give incorrects 판독값 . 그러므로 , if one or more readings are shown to be erratic , after investigation they should be eliminated .
검출기 shall be 위치 사이 절연 코일 - 측면 내부 슬롯 in 위치 at which the 최고 온도 are 가능성 to 발생 .
그만큼 검출기 shall be 위치 사이 the 쐐기 and the 외부 의 the 와인딩 단열재 in positions at which the highest temperatures are likely to occur , but see also 8.6.1.
온도 검출기 shall be located between two 인접 코일 - sides within the end 권선 in positions where the 최고 온도 are 가능성 to 발생 . The 감지 점 of each detector shall be in close contact with the surface of a coil - side and be 적절하게 보호 반대 영향 의 the 냉각수 , but see 또한 8.6.1.
인기 탭: 예 % 7b % 7b0 % 7d % 7dm % 7b % 7b % 7b % 7d % 7dv -ip55 % 2c 중국 % 2c 공급 업체 % 2c 제조업체 % 2c 공장 % 2c 맞춤형 % 2c 견적 % 2c 최저 가격 % 2c in 재고 % 2c 산 in 중국
|
정격 전력 |
별점 전압 |
정격 전류 |
능률 |
거듭제곱 계수 |
잠긴 전류 |
최대 토크 |
토크 |
관성 |
무부하 잡음 |
무게 |
|||
|
정격 토크 |
별점 전류 |
정격 토크 |
|||||||||||
|
同步转速동기 속도 3000r/min |
|||||||||||||
|
YE3-280M-2 |
90 |
380 |
160 |
2980 |
95.0 |
0.90 |
1.8 |
7.5 |
2.3 |
287 |
0.70 |
91 |
559 |
문의 보내기







